How-To: pH Testing

Ensuring the correct pH level of your nutrient solution is an important step to help plants grow healthier and stronger. Root Farm pH Up & Down is made just for this.

Here’s a quick how-to for checking and adjusting your pH.

Regular pH testing and adjustment is crucial to your grow

The foundation for any hydro garden is the Nutrient Solution, which is essential for plants to grow. Mixing the nutrient solution properly is important, but for a hydro garden to be successful, it must have a balanced pH as well.

pH testing helps your maintain the balance of your nutrient solution.
Our pH solutions make adjusting your pH super easy!

The target pH range for nutrient solutions is usually between 5.5 and 6.5. This allows for nutrients to be more readily available and effectively absorbed by most plants. A pH that is too high or too low can lead to nutrient deficiencies or toxicities that could harm the plant over time if it’s not corrected. Having the right pH is especially important for water-based hydroponic systems.

To measure the pH of your plant’s nutrient solution, you can use Root Farm pH test kit. Test the nutrient solution two to three minutes after adding the nutrients to the water in your reservoir. If the pH is between 5.5 and 6.5, you are good to grow. If not, you will need to either raise or lower the solution’s pH.

If the pH is too high, add Root Farm pH Down in small increments, testing the pH frequently until it reaches the desired level. If the pH is too low, add Root Farm pH Up following the same method.

IMPORTANT: whenever using these products to adjust the pH of your solution, be sure to wear protective gloves.

That’s it for this article on adjusting your  pH!  For more videos, tips and tricks, explore the Root Farm blog.

Carefully add pH Up or Down in small increments when adjusting the pH of your solution. Don't forget to wear protective gloves!